No Products in the Cart
If you are like most car owners, then you have searched for ways to make your vehicle a little less noisy. There are a few types of automotive sound deadening materials available, such as asphalt and butyl mats. While there are some who prefer asphalt-based sound-deadening materials, most vehicle owners who have butyl sound deadening mats installed in their cars highly recommend its use.
Arrowzoom Self-Adhesive Butyl Sound Deadening Mat is a high-end mat made to absorb vibrations and noises that travel through it giving you a dramatic reduction in irritating noises. Improve audio quality, enhance bass, combats vibrational distortion, In addition to sound insulation, the material should also have good thermal insulation properties. This will help to keep the car cool in summer and warm in winter.
The main purpose of these materials is to reduce noise in automobiles, and, to a lesser and greater degree, these do help to reduce the noise in cars, but are not as effective as butyl sound deadening mats. The advantage of installing butyl sound deadening mats is that the unwanted sounds your vehicle is making are reduced significantly, by covering only 25% of the surface area being soundproofed. This makes butyl more effective than other sound-reducing materials.
All our acoustic panels are non-toxic and environmentally friendly.
Butyl rubber is a great option for shock absorption and has exceptionally low gas and moisture permeability and outstanding resistance to heat, aging, weather, ozone, chemical attack, flexing, abrasion, and tearing. It is resistant to phosphate ester-based hydraulic fluids and has excellent electrical insulation performance. Butyl is not recommended for use when in contact with petroleum oils and fluids.
The natural structure of the butyl rubber molecules renders them very stable to weathering, age, and heat whilst also offering stability against a wide range of non-hydro-carbon-based chemicals. Being an all-hydrocarbon material Butyl has very low water absorption and the regular nature of the molecules allow close packing, this confers on them their uniquely low permeability to gas, air, and moisture.
Adhesive backed, east to cut and fit.
The sound deadener material allows you to deal with both, cold and heat. This is especially important in hot climate areas. A well-insulated interior is a pledge of high comfort while in the vehicle. Liner heat shield material will solve the problem of excessive heating if your car is equipped with a powerful engine and an enhanced exhaust system. It is also easy to use Liner as the hood insulation (hoodliner)
Good ozone resistance
Use it in your Automotives, Home Theaters, Studios or Gaming Room for acoustic treatment / Isolation Shield, or in offices as a Desk Privacy Panel.
Before applying the insulation mat, clean the surface carefully. Please make sure the surface is clean and dry as any dust on the surface will reduce the adhesiveness of the insulation mat.
Lay the insulation mat out for your specific application. Keep in mind that the insulation mat is evenly distributed throughout the surface of the entire surface of the given element.
Measure the designated areas that need to be field cut on the insulation mat and make the appropriate cuts without removing the adhesive paper (examples would be around beams, doorways, or if a short piece is needed). After all the pieces have been field cut, put the material back in the appropriate position on the wall or ceiling and lightly mark the bottom and side of where each piece will be light with a pencil to ensure straight application.
Slowly peel off the adhesive paper and hang the insulation mat on the designated surface. Once you peel off the sticker, the insulation mat should easily stick to the surface of your choice. Remove all the air bubbles from underneath by flattening them with your hands.
Use a roller to flatten out the insulation mat. Roll out the surface until it becomes flat and smooth.
If you would like to customize the size of the Butyl Sound Deadening mat that you needed, please send an email to us at email@example.com.
Butyl Rubber + Aluminum Foil
Black, Sky Blue, Gold
2mm x 46 cm x 80 cm (0.07 X 18.1 X 31.5 in)
We may split your order into multiple shipments for postage. And due to shipping requirements, we compressed (vacuum sealed) the acoustic foam for easy shipping.
Please kindly give up until 24 to 48 hours for the foam to restore its normal size.
If you are still not sure, feel free to speak to an expert now.
This is some good stuff I used it on all my car doors and I'm into SPL competitions I have 10 speakers total inside my car and definitely holes in the sound and they gave all my door panels a lot of weight and I have less road noise
Great stuff. Easy application, thin and lightweight but offers a ton of noise suppression.
This stuff is incredible and super easy to work with. I'm about half done but that's all i had time for. It cut my tin canny exhaust drone on my WRX dramatically, and i've only done under the rear seat and the trunk. Highly recommended.