Arrowzoom Pipe Insulation Foil Roll Product Description & Complete Guide
Arrowzoom Pipe Insulation Foil Roll is a heat-insulating layer for the insulation of pipes and ducts. It helps to reduce heat loss and improve noise levels inside the pipes.
What Are The Advantages Of Using Pipe Insulation Mat?
- It provides superior energy-saving performance.
- It has a lower thermal conductivity than other flexible closed-cell thermal insulation materials and has near-zero vapor permeability.
- All-in-one concept that enables fast and simple installation, and trouble-free operation, in a variety of environments.
- As a vapor barrier, the film ensures that no water vapor penetrates the insulation material and thus prevents mold formation and moisture damage.
- Aluminum foils reflect approximately 96% of radiant heat and are therefore very well suitable for thermal insulation.
Features & Highlights of Pipe Insulation Mat:
✅ Optimum Thermal Insulation
Made from high quality Foam Rubber and Aluminum Foil, thermally fused to pure reinforced aluminum foil. It can solve tight clearance issues with its very low thermal conductivity.
✅ Fire and Smoke Standards
Extensively tested to various international fire and smoke standards.
✅ Water Vapor Resistance
It is negligible water vapor permanence means no additional vapor barriers or coatings are required.
✅ Safe To Use
It is completely user-friendly and does not emit fibers or dust during installation or in service. It is non irritant, odorless, and will not support bacterial growth.
✅ Easy To Install & Cut
It contributes to reducing the installation time of mechanical services that may be installed afterward.
✅ Appearance & Durability
It provides an appearance and performance that remains unchanged for the life of the building without sagging or giving a quilted look.
✅ Green Building Compliant
Made without Ozone destroying agents such as CFCs or HCFCs.
Before & After Installed Pipe Insulation Mat
Arrowzoom Insulation Mat Sound Test
Technical Data Sheet
STC (Sound Transmission Class), is a numerical rating of how effective a material is at blocking the transmission of sound through itself. This rating generally applies to hard materials like rubberized sound barriers, concrete, brick and drywall but also applies to a much lesser degree to softer materials like mineral fiber (although it isn’t tested by itself; it’s tested as part of a wall system to verify its effectiveness).
How To Install Insulation Mat Step by Step
Step 1: Clean the Designated Area
Before applying the insulation mat, clean the surface carefully. Please make sure the surface is clean and dry as any dust on the surface will reduce the adhesiveness of the insulation mat.
Step 2: Locate the Insulation Mat for Outline
Lay the insulation mat out for your specific application. Keep in mind that the insulation mat is evenly distributed throughout the surface of the entire surface of the given element.
Step 3: Mark & Resize the Insulation Mat To Best Fit
Measure the designated areas that need to be field cut on the insulation mat and make the appropriate cuts without removing the adhesive paper (examples would be around beams, doorways, or if a short piece is needed). After all the pieces have been field cut, put the material back in the appropriate position on the wall or ceiling and lightly mark the bottom and side of where each piece will be lightly with a pencil to ensure straight application.
Step 4: Hang The Insulation Mat
Slowly peel off the adhesive paper and hang the insulation mat on the designated surface. Once you peel off the sticker, the insulation mat should easily stick to the surface of your choice. Remove all the air bubbles from underneath by flattening them with your hands.
Step 5: Seal The Insulation Mat
Seal the pipe insulation foil mat end using plastic strips.
Can I customize the size of the Pipe Insulation Mat that I needed?
If you would like to customize the size of the Pipe insulation mat that you needed, please send an email to us at firstname.lastname@example.org.
- 1 cm (0.4 in)
- 2 cm (0.8 in)
Size & Dimension:
- 100 x 28.3 cm (39.4 x 11.1 in)
- 100 x 62.8 cm (39.4 x 24.7 in)
We may split your order into multiple shipments for postage. And due to shipping requirements, we compressed (vacuum sealed) the acoustic foam for easy shipping.
Please kindly give up until 24 to 48 hours for the foam to restore its normal size.
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
I love this product. The install is easy and the product looks great. I was able to cover my entire exposed system with it and it feels warm when you put your hands in it.
Worked perfectly. I taped a pipe heater cord to my RV hose and then I wrapped my RV hose with this and it never froze in 28 degree weather. Very thick and sturdy insulation. Worked great!
We have one pipe under our sink that freezes. It's a different material from the other pipes, and it's the one that runs to our dishwasher. To keep it from freezing, we'd have to leave the cabinet doors open all day and night but we have a toddler and a puppy and neither one really understands things like don't eat detergent. We found this product, wrapped the pipe, and no more open cabinet or frozen dishwasher!!! Super duper easy and cheap and we couldn't be more pleased.
How Many Acoustic Foams & Soundproof Panels Do You Need?