Arrowzoom Car Insulation Foil Roll Product Description & Complete Guide
Arrowzoom Car Insulation Foil Roll is a heat-insulating layer for the insulation of cars. It helps to reduce heat loss and improve noise levels inside the cars.
What Are The Advantages Of Using Car Insulation Mat?
- It has a lower thermal conductivity than other flexible closed-cell thermal insulation materials and has near-zero vapor permeability.
- It provides superior energy-saving performance.
- Aluminum foils reflect approximately 96% of radiant heat and are therefore very well suitable for thermal insulation.
- As a vapor barrier, the film ensures that no water vapor penetrates the insulation material and thus prevents mold formation and moisture damage.
- All-in-one concept that enables fast and simple installation, and trouble-free operation, in a variety of environments.
Features & Highlights of Car Insulation Mat:
✅ Water Vapor Resistance
It is negligible water vapor permanence means no additional vapor barriers or coatings are required.
✅ Green Building Compliant
Made without Ozone destroying agents such as CFCs or HCFCs.
✅ Optimum Thermal Insulation
Made from high quality Foam Rubber and Aluminum Foil, thermally fused to pure reinforced aluminum foil. It can solve tight clearance issues with its very low thermal conductivity.
✅ Appearance & Durability
It provides an appearance and performance that remains unchanged for the life of the building without sagging or giving a quilted look.
✅ Easy To Install & Cut
It contributes to reducing the installation time of mechanical services that may be installed afterward.
✅ Safe To Use
It is completely user-friendly and does not emit fibers or dust during installation or in service. It is non-irritant, odorless, and will not support bacterial growth.
✅ Fire and Smoke Standards
Extensively tested to various international fire and smoke standards.
Before & After Installed Car Insulation Mat
Arrowzoom Insulation Mat Sound TestTechnical Data Sheet
STC (Sound Transmission Class), is a numerical rating of how effective a material is at blocking the transmission of sound through itself. This rating generally applies to hard materials like rubberized sound barriers, concrete, brick and drywall but also applies to a much lesser degree to softer materials like mineral fiber (although it isn’t tested by itself; it’s tested as part of a wall system to verify its effectiveness).
How To Install Insulation Mat Step by Step
Step 1: Clean the Designated Area
Before applying the insulation mat, clean the surface carefully. Please make sure the surface is clean and dry as any dust on the surface will reduce the adhesiveness of the insulation mat.
Step 2: Locate the Insulation Mat for Outline
Lay the insulation mat out for your specific application. Keep in mind that the insulation mat is evenly distributed throughout the surface of the entire surface of the given element.
Step 3: Mark & Resize the Insulation Mat To Best Fit
Measure the designated areas that need to be field cut on the insulation mat and make the appropriate cuts without removing the adhesive paper (examples would be around beams, doorways, or if a short piece is needed). After all the pieces have been field cut, put the material back in the appropriate position on the wall or ceiling and lightly mark the bottom and side of where each piece will be lightly with a pencil to ensure straight application.
Step 4: Hang The Insulation Mat
Slowly peel off the adhesive paper and hang the insulation mat on the designated surface. Once you peel off the sticker, the insulation mat should easily stick to the surface of your choice.
Step 5: Press Evenly To Remove Air Bubbles
Press the mat firmly into place, using a roller for larger pieces. The roller reduces the risk of leaving air pockets, which reduces sound damping capacity. The temperature of the mat and application surface should not be below room temperature during fitting. Heating the material is not necessary.
Can I customize the size of the Car Insulation Mat that I needed?
If you would like to customize the size of the Car insulation mat that you needed, please send an email to us at firstname.lastname@example.org.
Rubber + Aluminum Foil
- 7 mm (0.3 in)
- 10 mm (0.4 in)
Size & Dimension:
50 cm x 100 cm (19.7 in X 39.4 in)
We may split your order into multiple shipments for postage. And due to shipping requirements, we compressed (vacuum sealed) the acoustic foam for easy shipping.
Please kindly give up until 24 to 48 hours for the foam to restore its normal size.
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
This stuff is so badass! I could not believe how easy it was installing and how much of a difference it made in my truck.
I've only done one side of my vehicle on the floorboard from the front where the pedals are to the back seat and this material has made at least a 20% difference in deadening the sound from the road on the undercarriage. Great for doors, etc. to help acoustics for your sound system.
Moulds very easily & sticks firmly.
What a difference in cabin noise level. I have a Chevy cargo van with no divider so has a lot of road noise. I went a little above and beyond the recommended coverage recommendations and covered whole inside of both doors. Took awhile but well worth the effort. Thinking about doing the rest of the inside. Great product and highly recommend.
How Many Acoustic Foams & Soundproof Panels Do You Need?