No Products in the Cart
Acoustical Self-Adhesive Flat Wedge comes with adhesive tape at the back of each Tile. Flat Wedge improves vocal clarity In recording studios. It is designed to eliminate excess reflections and flutter echoes with a high NRC rating.
Self-Adhesive. Easy to cut and fit
These acoustic panels are designed by audio engineers that allows anyone who like to improve the sound quality or solve sound issues to save time.
Acoustic cell structure is designed to maximize noise absorption.
Sound-Absorbing Foam Made by Imported High Quality Foam. Best sound deadening to smooth the sound of your room.
Multi-colors and patterns are provided for you to choose from. You can make your own combinations to soundproof and decorate your room at the same time.
All our acoustic panels are non-toxic and environment friendly
In this video, it shows the acoustic test comparison after installed acoustic pyramid across room types: Music Studio, Home Theater, Meeting Room, Indoor Stadium, and Sound Insulation & Vibration
STC (Sound Transmission Class), is a numerical rating of how effective a material is at blocking the transmission of sound through itself. This rating generally applies to hard materials like rubberized sound barriers, concrete, brick and drywall but also applies to a much lesser degree to softer materials like mineral fiber (although it isn’t tested by itself; it’s tested as part of a wall system to verify its effectiveness).
Follow the guidelines below to install acoustic panels to your walls step by step.
Follow the instruction in this video to extract the acoustic foam
Lay the Foam out for your specific application. Keep in mind that you want the foam evenly distributed throughout the room.
Measure the designated areas that need to be field cut on the foam and make the appropriate cuts (examples would be around beams, doorways, or if a short piece is needed). After all the pieces have been field cut, put the material back in the appropriate position on the wall or ceiling and lightly mark the bottom and side of where each piece will be lightly with a pencil to ensure straight application.
Slowly peel off the adhesive paper and hang the insulation mat on the designated surface. Once you peel off the sticker, the Acoustic foam should easily stick to the surface of your choice. Remove all the air bubbles from underneath by flattening them with your hands.
Line up the materials on marked lines from Step 3 and press firmly against the material compressing the foam. Repeat step for remaining pieces of foam.
Arrowzoom has created these Professional Room Kits to create a quick fix for your household noise issue. Whether you need to eliminate noise from your Computer Gaming Room, Home Theater, Living Room, Music Room, Office Room or Recording Studio. Please visit our Room Kit Collection Page to choose the suitable one for you.
Black, Burgundy, Blue, Red, Gray, Yellow
25 X 25 X 2 cm (9.8 X 9.8 X 0.8 in)
Actual color may slightly differ depends on monitor settings.
We may split your order into multiple shipments for postage. And due to shipping requirements, we compressed (vacuum sealed) the acoustic foam for easy shipping.
Please kindly give up until 24 to 48 hours for the foam to restore its normal size.
