Posted on by DAI Designer

TIME REQUIRED: 1 Hour | DIFFICULTY: Easy
    As we discussed in our article on music and gaming on a budget, financing for a studio upgrade is usually limited. The nice news is that you can make up for lots of forms, and they don't have to require depriving yourself of consuming delicious meals for weeks on end! Building a DIY gaming studio rig is one of the best ways to minimize costs for gamers on a limited budget. Although most gamers may not be as good as craftsmen, we have put together a few helpful points about how to help you build your gaming studio.
    It takes tremendous sweat and time to create your game studio for you to accomplish your dream gaming rig. When you hack away at building your studio, try not to lose momentum or get irritated. Also, you'll have your game space when you're done, where you can conveniently reach, where you can play and watch whenever you want.

    A game content developer shares his experience with arrowzoom, according to RawTherapy, that by only getting the simple materials you can always accomplish a professional quality gaming setup. He shares in his video that various materials such as LED lights can be combined to make the studio look more professional. 

3 Simple Steps on How to Create a Gaming Setup Technical Level:
Unbox the foams and place it in a open space to restore the shape.

Hunt for the best spot

    This is one of the things that people don't know, so they talk about where you can put it in your room. You can spend a lot of time there because wherever you go, it'll be as relaxed, open, and friendly as possible. If you creep out of your house or you don't like the noises of the guest room, Only make the location palatable to yourself or put your workspace somewhere else. Set up a workspace that you know you would be hesitant to use.

RawTherapy Gaming Setup

Get your Acoustic Foams ready

    Restore the Arrowzoom Wedge Acoustic Foams by removing them in a vacuum seal from the box into their original form. Let it sit in a wide-open space for about 24-48 hours, or soak it in water and let it dry up. Water is a powerful component of foam formation or reconstruction. If the foams have returned to their initial shape, You can now apply the Arrowzoom Sticky tab to each of the foam corners. Peel off the paper tab to expose the adhesive. Make sure the place where the foam is being placed is dust-free and clear. Make confident that the tape's adhesive side is not contaminated with dirt and dust.
RawTherapy Gaming Setup

Get the foams built.

    When all the sticky tabs are applied to the acoustic foams, carefully line up the foams in the position you want them to be placed in. When inserting the foams, use pressure on the wall, then press it to keep it in place for about 30 seconds. In this segment, to make it more fun and professional-looking, you can also put LED lights at the corner side of your wall or even in your table.
    Building your home gaming studio is not always fast and simple. But with a bit of patience, a few videos from YouTube, and hopefully a few tests, you're going to be on the right track to enjoy the gaming studio you made on your own.
USE 10% CODE: AZ-CREATIVA