Brand New Acoustic Fabric
Made by Imported High Quality Polyester
Sound-Absorbing Fabric Panel
HIGH DENSITY - at more than 200kg/m acoustic Panel cell structure for maximum noise absorption to provide proven acoustical solutions.
SOUND ABSORBING - packed with High NRC rating that helps to flutter echoes and reduce excess reflections and reverberation.
MULTI-FUNCTION - Use it in Home Theaters, Studios or Gaming Room for acoustic treatment / Isolation Shield , or in offices as a Desk Privacy Panel
COST-EFFECTIVE - appealing yet effective soundproofing panels at cost-effective prices.
Improves vocal clarity and acoustics of your room
Ideal for use in recording studios, home theaters and karaoke room
7 Colors Available
Size & Dimension: 30 X 30 X 0.5~0.7 cm (11.8 X 11.8 X 0.2~0.3 in)
NOTE:

MAXIMUM 1 PIECE ONLY, FOR EACH SAMPLE STYLE
Acoustic foam color is selected randomly unless special request.
No tracking provided if entire order is only the foam samples. Tracking is available
only if the order is with other regular products with foam samples.

This New Acoustic Panel is made with High Quality Imported Fabric. Sound vibrations are
broadcast thru the air, causing issues with noise entering and exiting your house studio.

This sound absorbing Polyester Fabric panel is designed to reduce echo within an environment.
The Acoustic Studio Panel enhances the sound quality and aesthetics of any recording or
listening environment.

Why hire a Professional if you can construct a soundproof room in your house yourself!.

For the very best quality, most complete soundproofing you just need this New Acoustic
Fabric! Buy these New Acoustic Fabric now and have a perfect room to party!

Property Value Metric (Imperial) Test Method

Density (Core) 29 kg/m3 (1.8 lb/ft3) ASTM D1622
Compressive Strength 186 kPa (27.0 psi) ASTM D1621
Tensile Strength 241 kPa (35.0 psi) ASTM D1623
Open Cell Content 8.0% ASTM D2856
Water Absorption 1.2 % by volume ASTM D2842
Water Vapour Permeance
50mm sample 42 ng/Pa·s·m2 (0.70 Perms) ASTM E96
Dimensional Stability
Volume Change (%) after 28 days
-0.0 @ -20°C (-29°F)
1.5 @ 70°C (158°F) @ 97± 3% RH
0.4 @ 80°C (176°F)
ASTM D2126
Flame Spread Classification** Flame Spread <500
Smoke Developed <500
CAN/ULC-S102
Including S127
Time to Occupancy*** 24 Hours CAN/ULC-S774
Initial Thermal Resistance (50 mm) RSI: 2.45 m2·K/W (R: 13.9 ft2·hr·°F / BTU) ASTM C518
Hot-Surface Performance Passed when exposed to 93°C for 96 hours ASTM C 411
Fungi Resistance After 28 day incubation - no fungal growth exhibited ASTM C1338

Applications

Auditoriums • Broadcast Studios • Computer Rooms • Equipment Enclosures • Equipment Rooms • Gymnasiums • Gun Ranges • Home Recording Studios • Home Theaters • Industrial Facilities • Professional Theaters • Professional Recording Studios • Warehousing Facilities

General Installation Tips
Soft Sound Acoustic Studio Panel is typically surface mounted on the walls within a studio and will improve the overall acoustic performance of the space. It is important that you evenly distribute the panels throughout the room and not cluster in one area. The Acoustic Studio Panel is a modular pattern - the seams don’t always line up perfectly when butting the pieces end to end, this is explained further below.

The Polyester Fabric outlined in these instructions is not a Class A fire rated material and may not be acceptable for commercial environments.

Tools Required
utility knife, straight edge, tape measure, Glue gun, pencil or chalk line

Cutting

Mark the Acoustic Studio Panel to the appropriate size using the tape measure and marker.
Cut along the line using the utility knife. With the thicker fabric, it may take several passes to completely cut the Acoustic Studio Panel.
An alternate cutting method is to compress the foam along the line marked in Step 1. With the material compressed, it will reduce the number of passes that must be made to completely cut the fabric.

Installation Methods:

Lay the Acoustic Studio Panel out for your specific application - keep in mind that you want the Panel evenly distributed throughout the room. Acoustic Panel is a modular design and the seams don’t always line up with the pattern.
Measure any areas that need to be field cut on the foam and make the appropriate cuts
(examples would be around beams, doorways, or if a short piece is needed).
After all the pieces have been field cut, put the material back in the appropriate position on the
wall or ceiling and lightly mark the bottom and side of where each piece will be lightly with a
pencil to ensure straight application.
Glue each piece individually with PL Polyurethane Construction Adhesive. Create a perimeter around the outside of the material staying 1 ½ “ away from the edge. Create an X pattern across the center of the material.
Line the material up with the lines you marked in Step 3 and press firmly against the material
compressing the Panel. Repeat step for remaining pieces of panel.

Need Help? See Check Out Process.

Categories

PROMOTION