1 Pc SAMPLE Sound Deadening Polyester Fabric Panel KK1093

Arrowzoom Acoustic Polyester Fabric Panel Product Description & Complete Guide Arrowzoom Acoustic Polyester Fabric Panel is made...
$ 0.99 USD
$ 0.00 USD
$ 0.99 USD
Please hurry! Only -237 left in stock
Pieces: 1
Subtotal: $ 0.99
  • Arrowzoom Acoustics
  • Arrowzoom Acoustics
  • Arrowzoom Acoustics
  • Arrowzoom Acoustics

Free Shipping

Free standard shipping on orders over $100

Free Returns

Learn More.
1 Pc SAMPLE Sound Deadening Polyester Fabric Panel KK1093 1

1 Pc SAMPLE Sound Deadening Polyester Fabric Panel KK1093

$ 0.00 $ 0.99

1 Pc SAMPLE Sound Deadening Polyester Fabric Panel KK1093

$ 0.00 $ 0.99
Pieces: 1

Arrowzoom Acoustic Polyester Fabric Panel Product Description & Complete Guide

Arrowzoom Acoustic Polyester Fabric Panel is made with High Quality Imported Fabric. Sound vibrations are broadcast thru the air, causing issues with noise entering and exiting your house studio. This sound absorbing Polyester Fabric panel is designed to reduce echo within an environment. The Acoustic Studio Panel enhances the sound quality and aesthetics of any recording or listening environment.


Features & Highlights of Acoustic Polyester Fabric Panel:

✅ Easy to install

At more than 200kg/m acoustic Panel cell structure for maximum noise absorption to provide proven acoustical solutions.

✅ Sound Absorbing

Packed with High NRC rating that helps to flutter echoes and reduce excess reflections and reverberation.

✅ Cost-Effective

Appealing yet effective soundproofing panels at cost-effective prices.

✅ Multi-Function

Use it in Home Theaters, Studios or Gaming Room for acoustic treatment / Isolation Shield , or in offices as a Desk Privacy Panel

✅ Colors and Styles

Multi-colors and patterns are provided for you to choose from. You can make your own combinations to soundproof and decorate your room at the same time.


Before & After Installed Sound Deadening Polyester Fabric Panel

Arrowzoom Soundproof Foam Sound Test

In this video, it shows the acoustic test comparison after installed acoustic pyramid across room types: Music Studio, Home Theater, Meeting Room, Indoor Stadium, and Sound Insulation & Vibration


Technical Data Sheet

STC (Sound Transmission Class), is a numerical rating of how effective a material is at blocking the transmission of sound through itself. This rating generally applies to hard materials like rubberized sound barriers, concrete, brick and drywall but also applies to a much lesser degree to softer materials like mineral fiber (although it isn’t tested by itself; it’s tested as part of a wall system to verify its effectiveness).

 Arrowzoom Technical Data


How To Install Our AcouticPolyester Fabric Panel Step By Step

Step 1: Locate the Acoustic Foam For Outline

Lay the Foam out for your specific application. Keep in mind that you want the foam evenly distributed throughout the room.

Step 2: Resize the Acoustic Foam To Best Fit

Measure the designated areas that need to be field cut on the foam and make the appropriate cuts (examples would be around beams, doorways, or if a short piece is needed). After all the pieces have been field cut, put the material back in the appropriate position on the wall or ceiling and lightly mark the bottom and side of where each piece will be lightly with a pencil to ensure straight application.

Step 3: Apply Arrowzoom Tape or Glue the Acoustic Foam with Adhesive Spray

There are two ways to put the acoustic foams on the designated wall

Method 1: Use Arrowzoom Sticky Double Sided Tape. Each foam should use 4 tapes. One for each corner. Once you peel off the sticker, the Acoustic foam should easily stick to the surface of your choice.

Method 2: Glue each piece individually with PL Polyurethane Construction Adhesive. Create a perimeter around the outside of the material staying 1 1/2" away from the edge. Create an X pattern across the center of the material.

(Note: Due to Shipping Reason, we do not sell Glue)

Step 4: Hang the Acoustic Foam With The Marked Line

Line up the materials on marked lines from Step 2 and press firmly against the material compressing the foam. Repeat step for remaining pieces of foam.


How to cut the Polyester Fabric Panel?

You can use our Heavy-Duty Wood Acoustic Polyester Fabric Panel Cutter to cut your panels

Step 1: Mark the Acoustic Panel to the appropriate size using the tape measure and marker.

Step 2: Cut along the line using the Panel Cutter. With the thicker fabric, it may take several passes to completely cut the Acoustic Studio Panel.

Step 3: An alternate cutting method is to compress the foam along the line marked in Step 1. With the material compressed, it will reduce the number of passes that must be made to completely cut the fabric.


  • Acoustic Panel Color is selected randomly unless special request.
  • No Tracking Provided if entire order is only the foam samples. Tracking is available only if the order is with other regular products with Panel samples.

    Returns Policy



    Purchase over $100 USD or more to  get FREE Shipping. 

    Order Tracking Processing Shipping
    Normal Yes 1-2 days 1-2 weeks
    Express Yes 1-2 days 1 week or less

    Customer Reviews

    Based on 1 review
    Carl (Vashon, US)
    Nice material, but the sample is only in black

    It is hard to choose a color when the sample only includes a single color.

    Related Products

    Recently Viewed Products