No Products in the Cart
Arrowzoom Acoustic Polyester Fabric Panel is made with High Quality Imported Fabric. Sound vibrations are broadcast thru the air, causing issues with noise entering and exiting your house studio. This sound absorbing Polyester Fabric panel is designed to reduce echo within an environment. The Acoustic Studio Panel enhances the sound quality and aesthetics of any recording or listening environment.
At more than 200kg/m acoustic Panel cell structure for maximum noise absorption to provide proven acoustical solutions.
Packed with High NRC rating that helps to flutter echoes and reduce excess reflections and reverberation.
Appealing yet effective soundproofing panels at cost-effective prices.
Use it in Home Theaters, Studios or Gaming Room for acoustic treatment / Isolation Shield , or in offices as a Desk Privacy Panel
Multi-colors and patterns are provided for you to choose from. You can make your own combinations to soundproof and decorate your room at the same time.
In this video, it shows the acoustic test comparison after installed acoustic pyramid across room types: Music Studio, Home Theater, Meeting Room, Indoor Stadium, and Sound Insulation & Vibration
STC (Sound Transmission Class), is a numerical rating of how effective a material is at blocking the transmission of sound through itself. This rating generally applies to hard materials like rubberized sound barriers, concrete, brick and drywall but also applies to a much lesser degree to softer materials like mineral fiber (although it isn’t tested by itself; it’s tested as part of a wall system to verify its effectiveness).
Lay the Foam out for your specific application. Keep in mind that you want the foam evenly distributed throughout the room.
Measure the designated areas that need to be field cut on the foam and make the appropriate cuts (examples would be around beams, doorways, or if a short piece is needed). After all the pieces have been field cut, put the material back in the appropriate position on the wall or ceiling and lightly mark the bottom and side of where each piece will be lightly with a pencil to ensure straight application.
Slowly peel off the adhesive paper and hang the insulation mat on the designated surface. Once you peel off the sticker, the Acoustic foam should easily stick to the surface of your choice. Remove all the air bubbles from underneath by flattening them with your hands.
Line up the materials on marked lines from Step 2 and press firmly against the material compressing the foam. Repeat step for remaining pieces of foam.
You can use our Heavy-Duty Wood Acoustic Polyester Fabric Panel Cutter to cut your panels
Step 1: Mark the Acoustic Panel to the appropriate size using the tape measure and marker.
Step 2: Cut along the line using the Panel Cutter. With the thicker fabric, it may take several passes to completely cut the Acoustic Studio Panel.
Step 3: An alternate cutting method is to compress the foam along the line marked in Step 1. With the material compressed, it will reduce the number of passes that must be made to completely cut the fabric.
Black, Dark Gray, Light Blue, Red, Pearl White, Burgundy
30 X 30 X 0.5~0.7 cm (11.8 X 11.8 X 0.2~0.3 in)
The color stability of PEARL WHITE foams is affected by UV light, oxidation and room temperature. Discoloration (Turn into YELLOWISH color) may occur. Before making a purchase please make sure you are agreeing to this. We will NOT issue refunds after purchase that claim that color has been changed.
Actual color may slightly differ depends on monitor settings.
We may split your order into multiple shipments for postage. And due to shipping requirements, we compressed (vacuum sealed) the acoustic foam for easy shipping.
Please kindly give up until 24 to 48 hours for the foam to restore its normal size.
If you are still not sure, feel free to speak to an expert now.