No Products in the Cart
Arrowzoom Bass Trap is the best soundproofing solution to absorb low-frequency sound energy. Acoustic Bass Trap can create the greatest sound attenuation with minimum space.
Sound-Absorbing Foam Made by Imported High Quality Foam. Best sound deadening to smooth the sound of your room.
Acoustic cell structure is designed to maximize noise absorption.
With our improved design for the acoustic Multi-Cut Bass Trap, you can enjoy yourself without creating noise. Do not hesitate to create your own private space by installing our soundproofing foam.
Scissors, staples, tacks, nails, glue
All our acoustic panels are non-toxic and environment friendly.
Acoustic foam is fire-retardant. It stops fire from spreading and reduces its intensity.
In this video, it shows the acoustic test comparison after installed acoustic pyramid across room types: Music Studio, Home Theater, Meeting Room, Indoor Stadium, and Sound Insulation & Vibration
STC (Sound Transmission Class), is a numerical rating of how effective a material is at blocking the transmission of sound through itself. This rating generally applies to hard materials like rubberized sound barriers, concrete, brick and drywall but also applies to a much lesser degree to softer materials like mineral fiber (although it isn’t tested by itself; it’s tested as part of a wall system to verify its effectiveness).
Follow the guidelines below to install acoustic panels to your walls step by step.
Follow the instruction in this video to extract the acoustic foam
Lay the Studio Foam out for your specific application. Keep in mind that you want the foam evenly distributed throughout the room.
Measure the designated areas that need to be field cut on the foam and make the appropriate cuts (examples would be around beams, doorways, or if a short piece is needed). After all the pieces have been field cut, put the material back in the appropriate position on the wall or ceiling and lightly mark the bottom and side of where each piece will be lightly with a pencil to ensure straight application.
There are two ways to put the acoustic foams on the designated wall.
Method 1: Use Arrowzoom Sticky Double Sided Tape. Each foam should use 4 tapes. One for each corner. Once you peel off the sticker, the Acoustic Foams should easily sticky to the surface of your choice.
Method 2: Glue each piece individually with PL Polyurethane Construction Adhesive. Create a perimeter around the outside of the material staying 1 1/2" away from the edge. Create an X pattern across the center of the material.
(Note: Due to Shipping Reason, we do not sell Glue)
Line up the materials on marked lines from Step 3 and press firmly against the material compressing the foam. Repeat step for remaining pieces of foam.
If you would like to hear the sound comparison difference in different room settings, you can check out our case study for real-life applications.
Burgundy
30cm X 30cm X 25cm (11.8 in X 11.8 in X 9.8 in)
Actual color may slightly differ depends on monitor settings.
We may split your order into multiple shipments for postage. And due to shipping requirements, we compressed (vacuum sealed) the acoustic foam for easy shipping.
Please kindly give up until 24 to 48 hours for the foam to restore its normal size.
New Bass Trap Acoustic Panels Sound Absorption Studio Soundproof Foam 2 Colors KK1036
The goods came, the quality is very good, for such a price did not expect. It is clear that it will not fall asleep. it came in 2 weeks that very quickly.
good product, with tape it's better
Everything is fine, take a second time, a little there is a smell, but it goes lie in the air
Well protected, fast shipment
