No Products in the Cart
Arrowzoom Self-Adhesive Acoustic Eggcrate Panel comes with adhesive tape at the back of each Tile. Eggcrate Panel is perfect for large rooms in reducing noise. It can scatter noise energy to control harsh reflected reverberations through its open cell structure.
Self-Adhesive. Easy to cut and fit.
Acoustic cell structure is designed to maximize noise absorption.
All our acoustic panels are non-toxic and environment friendly
By controlling the sound reflections using absorption panels, you can concentrate on the sound that you would like to hear. Speech intelligibility is particularly critical for effective communication.
Acoustic panels are fire-retardant. It stops fire from spreading and reduces its intensity.
The high quality acoustic panel are designed by audio engineers that allow anyone who like to improve the sound quality or solve sound issues to save time. Best sound deadening to filter approximately most of the outside noise from entering the room.
Multi-colors and patterns are provided for you to choose from. You can make your own combinations to soundproof and decorate your room at the same time.
In this video, it shows the acoustic test comparison after installed acoustic pyramid across room types: Music Studio, Home Theater, Meeting Room, Indoor Stadium, and Sound Insulation & Vibration
STC (Sound Transmission Class), is a numerical rating of how effective a material is at blocking the transmission of sound through itself. This rating generally applies to hard materials like rubberized sound barriers, concrete, brick and drywall but also applies to a much lesser degree to softer materials like mineral fiber (although it isn’t tested by itself; it’s tested as part of a wall system to verify its effectiveness).
Follow the guidelines below to install acoustic panels to your walls step by step.
Follow the instruction in this video to extract the acoustic foam
Lay the Studio Foam out for your specific application. Keep in mind that you want the foam evenly distributed throughout the room.
Measure the designated areas that need to be field cut on the foam and make the appropriate cuts (examples would be around beams, doorways, or if a short piece is needed). After all the pieces have been field cut, put the material back in the appropriate position on the wall or ceiling and lightly mark the bottom and side of where each piece will be lightly with a pencil to ensure straight application.
Slowly peel off the adhesive paper and hang the insulation mat on the designated surface. Once you peel off the sticker, the Acoustic foam should easily stick to the surface of your choice. Remove all the air bubbles from underneath by flattening them with your hands.
Line up the materials on marked lines from Step 3 and press firmly against the material compressing the foam. Repeat step for remaining pieces of foam.
To remove light dust from your foam use a vacuum with an upholstery attachment. If you need more information, you can check our FAQ pages.
Black, Gray, Baby Blue, Blue, Red, Yellow, Burgundy
25 X 25 X 3 cm (9.8 X 9.8 X 1.1 in)
Actual color may slightly differ depends on monitor settings.
We may split your order into multiple shipments for postage. And due to shipping requirements, we compressed (vacuum sealed) the acoustic foam for easy shipping.
Please kindly give up until 24 to 48 hours for the foam to restore its normal size.
